Julia Pro
Replacing Nozzle PTFE
Last Updated: November 5, 2025Nozzle PTFE is an important component of the Nozzle. Even though it’s a tiny piece of plastic tube, it plays a major role in your print quality. The nozzle PTFE has the following functions: 1. Avoids leakage of molten filament material. 2. The PTFE tubes’ internal cavity has an extremely smooth surface, which reduces the...
Layer Shifting caused by pulley slipping down
Last Updated: November 5, 2025Motor Pulley is mounted on the Motor shaft with the help of a grub screw. The pulley acts as a bridge for transferring the motor’s rotary motion to the belts. The motor pulley comes under high stress and sometimes may get displaced. The displacement of the pulley will cause layer shifting in some cases. How...
SOP of the printer
Last Updated: November 5, 2025Please follow this SOP for the best performance and life of your printer.
Changing Material/ filament.
Last Updated: November 5, 2025Fracktal Printers support a wide variety of materials. This article will guide you through the procedure to change the filament. To change the filament, we need to unload the existing filament first. Note: While changing filament, always select the filament with the higher melting point in the filament change settings. Ex: If you have used...
How to make complete use of your accessories box.
Last Updated: November 5, 2025The accessories box contains these Accessories. Power cable: Please connect the power cable to the power socket in your printer and connect it to 3pin power socket. PTFE Tube: The PTFE tube is used to avoid tangling of filament and rubbing of filament against other surfaces. The PTFE tube allows for smooth movement of filament...