Setup And Installation
SOP of the printer
Last Updated: November 14, 2025Please follow this SOP for the best performance and the life of your printer.
Replacing Nozzle PTFE
Last Updated: November 14, 2025Nozzle PTFE is an important component of the Nozzle. Even though it’s a tiny piece of plastic tube, it plays a major role in your print quality. The nozzle PTFE has the following functions: 1. Avoids leakage of molten filament material. 2. The PTFE tubes’ internal cavity has an extremely smooth surface, which reduces the...
Changing Material/ filament.
Last Updated: November 14, 2025Fracktal Printers support a wide variety of materials. This article will guide you through the procedure to change the filament. To change the filament, we need to unload the existing filament first. Note: While changing filament, always select the filament with the higher melting point in filament change settings. Ex: If you have used ABS...
Filament sensor not working.
Last Updated: November 14, 2025Fracktal machines are equipped with filament sensors that automatically pause the print as soon as the filament runs out. You can load the filament once the machine stops and continue with the print. If your machines does not pauses as soon as it runs out of filament, most likely the filament sensor is not working....
How to make complete use of your accessories box.
Last Updated: November 14, 2025The accessories box contains these Accessories. Power cable: Please connect the power cable to the power socket in your printer and connect it to the 3-pin power socket. PTFE Tube: The PTFE tube is used to avoid the tangling of filament and the rubbing of filament against other surfaces. The PTFE tube allows for smooth...