PLA/PLA+
2 Docs
About: PLA, A brief introduction.
Last Updated: November 19, 2025PLA is the most widely used plastic filament material in 3D printing. Its low melting point, high strength, low thermal expansion, good layer adhesion, and high heat resistance when annealed make it an ideal material for this purpose. Without annealing, however, PLA has the lowest heat resistance of the common 3D printing plastics. But due to...
Mechanical Properties of PLA
Last Updated: November 19, 2025Please check the below details for Mechanical properties for PLA filament with SI units Tensile strength 41.83 ± 0.63 MPa Elongation at break at 4.07 ± 0.37 mm Young’s modulus 2004.33 ± 62.9 MPa