Snowflake
Firmware & Display Setup Guide
Last Updated: December 24, 2025This section provides instructions for setting up, updating, and verifying the firmware and display configuration of the Snowflake 3D Printer. Proper setup ensures stable operation, accurate controls, and compatibility with the latest software features. Step 1: Understanding Firmware and Display Components The Snowflake 3D Printer includes a 2.8-inch LCD dial display and an embedded control...
Mechanical Assembly & Inspection Manual
Last Updated: December 24, 2025This manual provides detailed procedures for assembling, aligning, and inspecting the mechanical components of the Snowflake 3D Printer before operation. Proper assembly ensures reliable performance, print accuracy, and long-term stability. Step 1: Verify Assembly Components Before beginning assembly, ensure that all parts and tools are available as listed in the Unboxing & Inventory Guide: Step...
Site Setup & Electrical/Network Guide
Last Updated: December 24, 2025This section offers detailed instructions for setting up the Snowflake 3D printer’s network connectivity, electrical connections, and installation site. Step 1: Site Setup 1. Place the Snowflake 3D Printer on a stable, flat, and vibration-free surface. 2. Ensure a minimum clearance of 20–30 cm around the printer for ventilation and easy maintenance. 3. Maintain ambient temperature between 5°C and 45°C with relative humidity below 70%. 4. Avoid locations exposed to direct sunlight, dust,...
SOP of the printer
Last Updated: November 5, 2025Please follow this SOP for the best performance and life of your printer.
Snowflake User Manual.
Last Updated: November 5, 2025Please refer to the attached file for the Snowflake user manual. Snowflake User Manual.
How to make complete use of your accessories box.
Last Updated: November 5, 2025The accessories box contains these Accessories. Power cable: Please connect the power cable to the power socket in your printer and connect it to the 3-pin power socket. PTFE Tube: The PTFE tube is used to avoid the tangling of filament and the rubbing of filament against other surfaces. The PTFE tube allows for smooth...
Pre-Installation Requirements
Last Updated: November 5, 2025This section provides the essential pre-installation checks and environmental requirements to ensure optimal setup and safe operation of your Snowflake 3D Printer. Step 1: Site Requirements 1. Select a clean, level, and vibration-free surface to place the printer. 2. Maintain a minimum clearance of 20 cm around the printer for ventilation and access. 3. Ensure...
Unboxing & Inventory Guide
Last Updated: November 5, 2025This guide outlines the steps to safely unbox your Snowflake 3D Printer and verify all included components before installation. Step 1: Inspect the Packaging 1. Place the delivery box on a clean, flat, and stable surface. 2. Examine the outer carton for visible damage or tampering during transit. 3. If damage is found, photograph and...