Consulting & Design
Get it right the first time. From CAD to process parameters to the finished production route — the engineering that decides whether additive manufacturing actually works for your application.
Trusted, recognised and featured
The Part Before the Part
Most additive projects that fail do not fail on the machine. They fail because the geometry was designed for milling, or the material was chosen from a datasheet without reading the print direction, or nobody costed the post-processing.
Our engineering team works on that half. We have been designing for these processes and building the machines that run them since 2013, and the advice comes from parts that were actually made — not from a slide deck.
What We Do For You
Eight engagements, from a single afternoon to a full production programme.
3D CAD design
From a sketch, a scan or a specification to a manufacturable parametric model.
Application consulting
Whether additive fits at all, where it fits, and what it displaces when it does.
DfAM & process parameters
Machine, material, data preparation and post-processing tuned together — first time right.
Post-processing strategy
The finish route that reaches the target aesthetic or function without doubling the cost.
Reverse engineering
Scan-to-CAD to reproduce or improve a part that exists but was never documented.
Smart structures & 4D printing
Geometry that changes state — compliant mechanisms, programmed deformation, lattices.
UAV & drones
Light, stiff airframe and payload structures, and the material choices behind them.
IIoT
Connected machines and instrumented production — the software half of a machine shop.
Four Steps, and You Are In All of Them
Taken from how we actually run engineering projects — not a generic waterfall.
01 · Requirement analysis
Calls, meetings and a site visit where it matters. We would rather understand the problem than quote quickly.
02 · Plan & proposal
A detailed scope of work written against the outcomes you asked for, with what is and is not included.
03 · Work begins
Development starts once the quote and SOW are accepted, and we check in at every agreed milestone.
04 · Delivery & review
The project is delivered and reviewed against those outcomes. Feedback goes back into the work, not into a file.
Four Steps From File to Part
The same route for every process on this page.
01 · Upload your CAD
Pick a manufacturing process, upload the 3D file and tell us the quantity and finish.
02 · Get a DFM analysis
We come back with a design-for-manufacturability review and a price — not just a price.
03 · Manufacturing begins
Approve the quote and the job goes on the floor. You are told when it starts, not only when it ends.
04 · Parts are shipped
Packed, tracked and shipped anywhere in India, with the tracking number in your inbox.
Other Manufacturing Services
FDM 3D Printing
Engineering polymers, one-off to small batch, ±0.5 % accuracy.
SLS 3D Printing
Nylon powder bed — no supports, full geometric freedom, ±0.3 %.
HP MJF 3D Printing
Multi Jet Fusion for production-rate nylon parts with even properties.
SLA 3D Printing
Resin for the finest detail and the best surface finish — ±0.2 %.
Vacuum Casting
Silicone tooling for 1–25 identical cast-polyurethane parts.
Finishing & Assembly
Sanded, blasted, painted, inserted and assembled before it ships.
Reverse Engineering
Scan-to-CAD for the part that exists and the drawing that does not.
Quality Assurance
Dimensional and material verification, documented.
Send us the part
Upload the file and tell us the quantity. You will get a design-for-manufacturability review and a price back — not just a price.