Snowflake
Performance 3D printing, made accessible. Hardware, software and materials designed together, in a desktop machine that prints well before anybody has tuned it.
Trusted, recognised and featured
Built to Spec
Build Size
Temperature
Materials
Accuracy
Getting quality 3D prints is a lot easier than you think
A workflow that works out of the box. No tuning, no prior experience required.
Slicing
Pre-configured slicing settings for every material. No tuning or prior experience required.
3D Printing
A plug-and-play printer that calibrates itself. Load the file and go.
Finished Part
Parts come off the machine accurate and repeatable, without a tuning pass first.
How Much You Get per Build
The maximum build volume determines the biggest part you can make. Snowflake gives you a full 200×200×200 mm, which is 8,000 cc of usable space.
That’s the lowest cost per cubic centimetre of any printer in its category: the most value for your money, print after print.
The Details That Make the Difference
Every part is chosen to make reliable printing the default rather than something you tune for.
Direct Drive Extruder
Enough pushing force to extrude and retract accurately, which is what a flexible material like TPU needs.
Precision Filament Sensor
Automatically stops the machine on filament run-out, so a long print never fails halfway through.
Responsive Display
A 3-inch LCD and a dial knob that responds. Everything the machine does is reachable from it.
Magnetic Print Sheet
A removable magnetic sheet holds prints firm and pops them off clean; swap surfaces to suit each material.
Industrial DNA in a Desktop Machine
Heated Build Platform
Reaches up to 130°C for reliable printing in engineering-grade materials like ABS, PC and Nylon.
Genuine E3D Nozzles
Swappable original E3D nozzles at the core ensure maximum uptime and a wide material range.
Sheet-Metal Construction
A full sheet-metal chassis on CNC-machined parts, so the frame does not move as the machine ages.
Snowflake, Start to Finish
Snowflake going from a sliced file to a finished part, with nothing tuned along the way.
Snowflake at a Glance
| Specification | Snowflake |
|---|---|
| Build volume | 200 × 200 × 200 mm (8,000cc) |
| Max nozzle temperature | Up to 280°C |
| Heated bed temperature | Up to 130°C |
| Materials | PLA / PLA+, ABS, ASA, PET-G+, Wood, Metal-filled |
| X/Y resolution | 50 µm |
| Z resolution | 5 µm (nozzle-size dependent) |
| Extruder | Direct drive |
| Hotend | Genuine E3D, swappable nozzles |
| Display | 3″ LCD with responsive dial knob |
| Print surface | Magnetic, removable flexible sheet |
| Sensors | Precision filament run-out sensor |
| Recovery | Automatic power-failure recovery |
| Levelling | Automatic bed levelling |
| Construction | Sheet-metal chassis with CNC-machined parts |
A Complete Solution in a Compact Package
Derived from the DNA of our industrial printers, Snowflake packages that into a compact desktop machine, designed on a decade of building 3D printers in India.
Customers Also Explore
Julia
Built for classrooms and labs: 60µm resolution, an integrated camera and IoT control.
Twin Dragon
Two independent extruders over a 600×600×400mm bed, for two-colour, dual-material, mirror and duplication work.
Volterra
A 450°C hotend and a 90°C chamber, for the engineering polymers nothing else will hold.
Dragon
One extruder, built for the large and demanding parts that run in engineering-grade material.
Material Dryer (MDS1)
Keeps hygroscopic filament print-ready. Moisture control that works with any printer.
PrintStick™
A water-washable bed adhesive that holds the first layer down on any build surface.
Ready to start printing?
Talk to our engineers about the right Snowflake configuration for your workspace.