Finishing & Assembly
A part off the machine is a part half made. Support removal, sanding, blasting, smoothing, paint, inserts and assembly — so what lands on your desk is the product rather than the print.
Trusted, recognised and featured
The Half of the Job Nobody Quotes For
Every process on this site leaves something behind — support scars on FDM, a granular skin on SLS, support nubs and a tacky surface on SLA. Getting from that to a part that can be handed to a customer is work, and it is work that decides what people think of the part.
We do it in-house, on the same floor as the machines, which means the finish is specified when the part is quoted rather than discovered after it ships.
What We Can Do To a Part
Pick a level when you order and it is priced in, not added on.
Support removal & de-powdering
Standard on every part. Supports off, powder out of every internal cavity, edges cleaned.
Sanding & vapour smoothing
Progressive wet sanding, or acetone vapour on ABS and ASA for a gloss with no abrasive marks.
Bead blasting & dyeing
An even matte skin on powder-bed parts, then deep dyeing — colour through the surface, not on it.
Priming & painting
Filler-primed, wet sanded and sprayed to a RAL or Pantone reference, matte through to gloss.
Threaded inserts & hardware
Heat-set brass inserts, helicoils, bearings, magnets and dowels fitted and checked.
Assembly & function test
Sub-assemblies built, fasteners torqued, moving parts checked before anything is packed.
Process Specification
| Parameter | What you get |
|---|---|
| Level 1 — as printed | Supports removed, de-powdered, edges cleaned. Included on every part. |
| Level 2 — smoothed | Progressive sanding to 400 grit, or bead blast on powder-bed parts. |
| Level 3 — vapour smoothed | Acetone vapour on ABS / ASA — gloss with no sanding marks. |
| Level 4 — dyed | SLS and MJF nylon dyed through the surface. Black and colours. |
| Level 5 — primed & painted | Filler primer, wet sand, spray to a RAL or Pantone reference. |
| Level 6 — assembled | Inserts, hardware, sub-assembly, function check, packed as a unit. |
| Also available | Masking, two-tone paint, soft-touch coating, clear coat, laser marking |
| Lead time | Adds 1–4 working days depending on level |
Four Steps From File to Part
The same route for every process on this page.
01 · Upload your CAD
Pick a manufacturing process, upload the 3D file and tell us the quantity and finish.
02 · Get a DFM analysis
We come back with a design-for-manufacturability review and a price — not just a price.
03 · Manufacturing begins
Approve the quote and the job goes on the floor. You are told when it starts, not only when it ends.
04 · Parts are shipped
Packed, tracked and shipped anywhere in India, with the tracking number in your inbox.
Other Manufacturing Services
FDM 3D Printing
Engineering polymers, one-off to small batch, ±0.5 % accuracy.
SLS 3D Printing
Nylon powder bed — no supports, full geometric freedom, ±0.3 %.
HP MJF 3D Printing
Multi Jet Fusion for production-rate nylon parts with even properties.
SLA 3D Printing
Resin for the finest detail and the best surface finish — ±0.2 %.
Vacuum Casting
Silicone tooling for 1–25 identical cast-polyurethane parts.
Reverse Engineering
Scan-to-CAD for the part that exists and the drawing that does not.
Quality Assurance
Dimensional and material verification, documented.
Consulting & Design
DfAM, material selection and process design, from CAD to production.
Send us the part
Upload the file and tell us the quantity. You will get a design-for-manufacturability review and a price back — not just a price.