On-demand manufacturing

Get a Quote for Your Part

Send us the file and what the part has to do. You get back a price, a process recommendation and a lead time — and if 3D printing is the wrong answer for your part, we will say so and tell you what is.

Send Your File What Parts Cost

5 processes20+ materialsDFM check includedBengaluru floor

How it works

Four Steps, No Account Needed

1 — Send the file

STEP, STL, IGES or a native CAD file. Tell us the quantity, the material if you know it, and what the part has to survive.

2 — We check it

An engineer looks at wall thickness, tolerances and orientation before quoting. Problems get flagged with the quote, not after you have paid for the part.

3 — You get a price

A firm quote with the process, the material and the lead time. Price on request per job — geometry moves the number more than any rate card.

4 — We make and ship

Printed, post-processed and inspected on our own floor in Bengaluru, then couriered anywhere in India.

What to send

What Makes a Quote Fast and Accurate

The geometry

STEP is best — it keeps real curves and exact dimensions. STL works, but export it at a fine tolerance or curved faces arrive faceted.

The duty

Load, temperature, chemicals, UV, whether it is cosmetic. This decides the material, and the material decides most of the price.

The quantity

One part and fifty parts are different manufacturing problems. Above roughly fifty, ask us about vacuum casting as well as printing.

What we can make

Processes We Quote

Process	Accuracy	Best for	Price
FDM	± 0.5 %	Functional parts, jigs, fixtures, engineering polymers	On request
SLS	± 0.3 %	No supports, complex geometry, near-isotropic nylon parts	On request
HP MJF	Fine features, even properties	Small batches of tough nylon parts with a fine matte finish	On request
SLA	± 0.2 %	Finest detail and the smoothest surface as-made	On request
Vacuum casting	Master-dependent	10–50 copies without cutting steel tooling	On request

Questions

Quoting Questions

How much does a 3D printed part cost?

Prices are quoted per job rather than published as a list — part geometry, material and finish move the number far more than any table can show. Send the file and the quote comes back with the figure. As a rule the drivers are, in order: the volume of material, the process, the finish and the quantity. A small jig in PLA and the same shape in carbon-fibre nylon are not close to the same price.

What file format should I send?

STEP for preference, because it carries true geometry and exact dimensions. STL, IGES, OBJ and most native CAD formats are fine too. If all you have is a drawing or a physical sample, we can reverse engineer it — that is a service we run.

Will you tell me if 3D printing is wrong for my part?

Yes, and we do. If the part wants machining, moulding or casting, printing it is a slow way to get a worse part. Above roughly fifty units, vacuum casting is often the honest answer, and we offer that too.

Do you check the design before printing?

Yes. Every quoted file gets looked at for wall thickness, unsupported spans, hole sizes and orientation. If something will not print well, it is flagged with the quote rather than discovered afterwards.

Do you ship outside Bengaluru?

Yes — parts go by courier across India. We are based in Bengaluru and manufacture everything on our own floor.

Before you send

Worth Reading First

Send the File

Tell us what the part has to survive and we will quote the process, the material and the lead time.