PrintStick Standard Refill — 100 ml

Description

The applicator is the expensive part — the moulded head, the valve and the felt. Once you own one, you should only ever have to buy the adhesive again. This is that bottle: 100 ml of PrintStick Standard with a flip-top cap, enough to fill a 50 ml stick twice.

Same formula as the stick. A solvent-carried polymer that lays a thin, even film, grips the first layer while the plate is hot, and lets go on its own as the bed cools. It comes off the plate with a damp cloth and leaves nothing on the underside of the part.

Standard is for the materials that print on a bed below 80 °C: PLA, PET-G, CF-PETG and TPU. If you print ABS, ASA, PC, PC-ABS, PP or Nylon, take the Plus refill instead.