Fracktory Slicer
Sending Gcode to Fracktal care for troubleshooting.
Last Updated: November 14, 2025Analysing the G-code is one of the primary steps done while troubleshooting issues. The G-code, which may be fine in your system, may get corrupted while uploading to your printer. To make sure this corruption has not happened, we recommend analysing the G-code from the printer. So if a Fracktal care representative asks for G-code,...
Tuning material settings on Fracktory.
Last Updated: November 14, 2025The most important part of the Fractory window is the settings panel on the right. You need to choose the correct settings in this panel to get your desired print quality. Fractory’s settings panel is divided into two sections. The topmost section is the Printer Settings, and the next section is called Print Setup. PRINTER...
Getting started with Fractory.
Last Updated: November 14, 2025First, download the file from the following link: Fractory Unzip the file and open the Fractory 3.1 folder. Double-click on Fractory.exe to run Fractory. For more details on using Fractory, refer to the PDF attached Manual